Draw tite Weight Distribution Hitches, Sway Controls And Camper Towing Accessories

The Draw-tite Round Bar Weight Distributing Hitch features easy-to-use adjusting blocks for easier and faster ball mount angle adjustment. It includes a one-piece cast head, snap-up brackets and chains. The Round Bar Weight-Distributing System includes the highest rated spring bars per class in the industry. Other popular features include 9-link chains for easier set up on larger trailer frames and innovative proven snap-up brackets designed for superior strength and durability.

Evolving to meet the changing requirements of the towing market, Drawtite Trunnion Bar Weight Distributing Hitches provide a softer ride and and distribute load forces more evenly than ever before. The carrying capacity of these hitches is rated higher than others in the marketplace, allowing consumers to tow heavy loads with confidence. Trunnion Bar Weight Distributing Hitches are designed for medium to heavy duty towing, and are recognized as the strongest and best performing type of weight distribution towing.

Forged, Bolt-Together Trunnion Style Head
Rated up to 600/6,000 lbs. Weight Carrying and 1,200/12,000 lbs. Weight Distributing
Innovative Design Eliminate the Need for Trunnion Bar Retention Clips
Available in 600, 800, and 1,200 lb. Tongue Weight Models
30" Spring Bars Standard
Integral Dual Platform Supports Left Hand and Dual Sway Control Applications
Elevated Hitch Ball Platform Provides
Superior Coupler Clearance
Hook-Up Brackets Designed to Provide Increased Frame Clearance
Assembly Hardware and Chains Included
Black Powder Coat Finish

7901 Trunnion Bar WD Kit 600 Pnd Tongue Weight/12,000 Pound Gross Trailer Weight Shank Not Included (see shank listings below) $ 269.95 Add To Basket

7902 Trunnion Bar WD Kit 800 Pnd Tongue Weight/12,000 Pound Gross Trailer Weight Shank Not Included (see shank listings below) $ 269.95 Add To Basket

7903 Trunnion Bar WD Kit 1200 Pnd Tongue Weight/12,000 Pound Gross Trailer Weight Shank Not Included (see shank listings below) $ 269.95 Add To Basket

Draw-Tite Weight Distributing Shanks

Designed for use with all Trunnion and Round Bar WD Hitches.

Open Head Design Allows Easy Tool Access for Hitch Ball Tightening
Rated up to 1,400 lb. Tongue Weight
Designed for Use in the Rise or Drop Position
Black Powder Coat Finish


Part No.	Description
3210	Wt.-Dist. Shank, 14,000 lbs. (GTW), 1,400 lbs. (TW)Standard Length 10" Up to 2" Drop/5" Rise *	$ 94.95	Add To Basket

3213	Wt.-Dist. Shank, 14,000 lbs. (GTW), 1,400 lbs. (TW)Optional Length 12" Up to 5" Drop/9" Rise *	$ 94.95	Add To Basket

* Drop/Rise Equals Distance From Top Of Trailer Hitch to Top Of Ball Platform On WD Unit

Friction Bar Sway Controller By Draw Tite

Uses friction to resist pivotal movement and thereby works against the effects of induced sway.
Operates on the principle of "stiffening" the coupling between the tow vehicle and trailer.
The degree of "stiffening" or friction is adjusted to suit various trailer weights and conditions.
Works to resist the forces of sway once they have started.
Includes both a universal ball attachment and a direct mount ball for use with our weight distributing hitches which have built in platforms.

# 40660 Friction Sway Control Kit $ 74.95

Add To Basket

*Sway Control Devices Are Not Designed For Use With Surge Brakes

Reese Dual Cam HP Sway Control

This patented product is the premier method for controlling trailer sway.

Unlike the friction sway control, this approach works to control sway from the start rather than just resisting sway once it's begun. And it works only when needed. When towing in a straight line, the cams on either side of the trailers A-frame are locked in position. This essentially creates a "rigid" connection between tow vehicle and trailer and minimizes the effects of induced sway caused by high crosswinds or passing vehicles. Usually the cams ride in a detent, locked-in position, even on fairly sharp curves. However, when cornering maneuvers are required, the cams automatically slide out of their detent to permit full radius turns. Yet when the maneuver is short and abrupt, like that encountered in the event of a sudden swerve or a wheel dropping off the road, the cams seek a straight-line towing angle that helps the tow vehicle retain control. The advantage of the Dual Cam system is its ability to forestall sway in addition to sway resistance. It works to hold down the start of swaying activity while at the same time allowing free and easy vehicle and trailer interaction. Another advantage of the Dual Cam system is that it's installed on the trailer and therefore doesn't require adjustment every time the towing vehicle and trailer are hooked up, unless hitch weight or tow vehicle loading are changed.

$ 187.95 Add To Basket

*Sway Control Devices Are Not Designed For Use With Surge Brakes

Replacement Weight Distributing Bars

When replacing or upgrading/downgrading weight distributing bars it is important to attempt to match the tongue weight of the trailer as closely as possible. Using bars that are to heavy or to light can have an effect on the recovery and control of the trailer when driving over bumps, railroad tracks etc. If you are not sure of your trailers tongue weight, and cannot properly weigh it you can use 10% of the gross weight of the trailer as a guide. When "in the middle" it is better to use the higher rating.

Round Bar Style

# 3327 Round Bar Kit 550 Pound $ 149.95 Add To Basket

# 3328 Round Bar Kit 750 Pound $ 149.95 Add To Basket

# 3329 Round Bar Kit 1000 Pound $ 149.95 Add To Basket

Trunnion Bar Style

# 6662 Trunnion Bar Kit 600 Pound $ 149.95 Add To Basket

# 6664 Trunnion Bar Kit 800 Pound $ 149.95 Add To Basket

# 6666 Trunnion Bar Kit 1200 Pound $ 149.95 Add To Basket

Replacement WD Bracket Kit

#6637 Replacement Bracket Kit $ 69.95 Add To Basket

Pole Tongue Adapter # 3280

This Pole Tongue Adapter is used as a mounting platform for the hook-up brackets of a weight distributing hitch system on trailer with a pole or straight tongue rather than an A-frame tongue.

Fits All Lift Units Regardless of Manufacturer $ 74.95 Add To Basket
Fits Tongue Widths From 1-5/8" to 5"
Fits Tongue Heights From 3" to 6"

For Complete Weight Distribution Systems Click Here Everything you need in one kit

hitches to go ATA INTERNET SERVICES

866-744-4282

Call For Information Monday Through Friday 8:00AM - 5:00PM EST or E-mail Us

QUALITY GOODS AND SERVICES SINCE 1981

All transactions secured by CybrHost GeoTrust