Trailer Hitch Wiring

 T-One  Custom Fit No Splice Wiring Kits

Plus Universal Wiring Kits And Adapters

Drawtite T-One Wiring Kits Make Wiring Your Vehicle Easy And Foolproof.

• Each T-One Kit Is Custom Designed For A Specific Vehicle.

• Factory Style Weatherproof Connections, And Solid State Electronics.

• Most Units Plug Right Into Your Vehicles Existing Harness (Some Units Require A Connection To Your Battery...All Parts And Instructions Are Supplied)

• T-One kits vary in size, style and appearance, depending on the requirements of your vehicle.

Find Your Vehicle In The Listings At Left...

 Not all vehicles can use a T-One kit, as it requires a connection point in the vehicles existing wiring to hook into, or there may be other reasons for not manufacturing one. 

If your vehicle is not listed return to this page and select the Modulite Wiring Kit

                                      Draw tite Modulite  Wiring Kits

 For All Vehicles When T-One Custom Fit Wiring Kits Are Not Available

Modulite® Protector, with Its Integrated Circuit Protection Safeguards Itself and the Tow Vehicle Against Harmful Electrical Shorts and Mis-wire Situations.  Recommended on all vehicles that do no have a T-One Kit.

• Isolates Trailer Light Operation From Tow Vehicles Electrical System.

• Necessary For Today's Vehicles With Computerized Operating Systems.

• Will Not Interfere with Tow Vehicle Computer Systems And Anti-Lock Brake Systems.

• Works with 2 Or 3 Wire Lighting Systems. 

Installation Instructions "Adobe Reader" is needed to open this file. It can be downloaded free at www.adobe.com

  Modulite Protector With Installation Kit $ 41.95    

• Contains Modulite, All Necessary Instructions, Wiring, Fuses, And Quick Connectors For Easy Installation Of Your Modulite Protector   Add To Basket

 How the Modulite Works

Current Paths Without Modulite

Trailer Draws Power Through the Vehicles Light Circuits

Current Paths With Modulite

Trailer Draws Power Directly From Tow Vehicles Battery

1. The tail, turn and stop light circuits of today's vehicle are manufactured with light gauge wire, designed to carry only enough current to supply the lights the vehicle is equipped with. Sensitive electronic devices such as "lamp-out" sensors are designed to monitor the vehicle's electrical system and warn the driver of problems with the system. The additional load of trailer lights on these sensors can cause them to react falsely and in some cases, lead to failure.

2. ModuLite trailer light power modules provide power to the trailer lights directly from the tow vehicle's battery. By directly powering the trailer lights, the tow vehicle's tail, turn and stop lights are not exposed to any additional loads.

3. ModuLite is designed for use on vehicles that have separate turn and stop light circuits and converts their signals into those needed by standard trailer wiring. Hazard flasher override circuitry is also included, illuminating the trailer brake lights when the tow vehicle hazard flashers are in operation. ModuLite can additionally be used on any vehicle with a standard 2-wire system requiring a reduction of load on it's electrical system.

4. ModuLite eliminates the need for a heavy-duty flasher, as the power for the trailer lighting is supplied directly from the tow vehicle's battery and not through the vehicle's electrical system. ModuLite products are capable of providing up to 20 amps of power per circuit to the trailer lights.

ModuLite products are required when towing with any of the following:

• Any vehicle equipped with lamp-out sensors or other electronic devices that could be damaged by attaching trailer lights directly to the tow vehicle's electrical system. The trailer being towed is equipped with more than one light assembly per side.

• The trailer being towed is equipped with multiple clearance and running lights that may pose an increased load on the tow vehicle's electrical system. Is this the only vehicle the driver will ever tow? Future towing needs change and in time, a ModuLite may be required.

Vehicle Manufacturers caution against adding additional loads to electrical circuits. Always consult the vehicle's owners manual when installing trailer wiring. The following are just two examples from vehicle owner's manuals:

Jeep Grand Cherokee
"Do not connect a trailer lighting system directly to the lighting system of your vehicle. Use an approved trailer wiring harness. Failure to do so could damage the vehicle electrical system and/or result in personal injury."

Dodge Ram Pickup
"Towing a trailer equipped with more than the standard lighting (turn, tail, stop and back-up lamps) may cause an abnormally high electrical draw through the headlamp switch, causing the switch to fail."

ModuLite Protector installs in less than 1 hour!

__________________________________________________

Universal Adapters and Wiring Kits