|
Brake Controller Information & Wiring Parts
Inertia Brake Controllers
Proportional Brake Controllers
Trailer Hitch Fitment Guide
Wiring Kits And Information
Hitch
Balls, Ball Mounts, Locks, Adapters & Extenders
Gooseneck Hitch Installation Kits
Reese Sway Controls And Weight
Distributing Hitches
Motorhome Trailer Hitches
Bike Racks
From Swagman, Rola and Drawtite
Hitch
Mounted Cargo Carriers And Accessories
Roadmaster
Active Suspension Helper Springs
Trailer Hitch Accessories
Front Mounted Trailer Hitches
Wheelchair and Scooter Lifts
Wildcat Flash Nerf Bars
About
Us
Shipping/Warranty
Site
Map
Transactions secured by CybrHost GeoTrust
|
For General Information On Brake Controllers and Wiring Kits Click Here
Timed Electric
BRAKE CONTROLLERS
Timed Brake
Controller Installation
|
 |
 |
 |
 |
 |
 |
 |
|
Under
Dash |
Any
Angle |
Vertical |
Top
Of Dash |
Timed brake controllers are
activated by stepping on the vehicles brake pedal or by using a manual
lever to generate a signal to the trailer brakes which smoothly
increases over time. Because they do not require leveling these brake
controls can be installed anywhere.
Draw-tite POD Brake
Controller #20189
Only $
44.95
Add To Basket
-
For 1-2
axle trailers
-
Solid state electronics
-
Simple output dial adjustment (no sync
control)
-
Power On LED for a positive vehicle to
trailer connection
-
Up front
manual over-ride
-
Instructions and hardware included
-
No leveling
required. Great for dashboards and locations where level installation is
difficult.
-
Quickly and easy installation on your factory pre-wired
vehicle using our custom fit plug
in adapters or universal installation kit (for vehicles that are not pre-wired)
SEE BELOW
Note: Not designed for use with electric/hydraulic trailer brake systems.
Activator II Brake Controller
# 5500
ONLY $69.95 Add
To Basket
Drawtite
Activator 2 is one of our most proven and reliable brake controllers, and is one
of the most popular brake
control systems in the industry.
Activator II Readout
|
 |
 |
Output Adjust or display the current output setting on a scale 0.0 to 10.0
|

|

|

|
Sync Adjust or display the current sync setting.
|

|

|

|
Output If a short or overload is sensed, an Overload warning is displayed
|
Note: Not designed for use with electric/hydraulic trailer brake systems. Can
be used with BMW X5 Sport utility vehicles....call
for information.
-
For 1-4
axle trailers
-
Illuminated digital output indicator for exact power control.
-
Adjustable "Sync Control" allows for
control of "ramp up"
-
Thumb
wheel output
adjustment
-
Up front
manual over-ride
-
Overload
indicator
-
Instructions and hardware included
-
Quickly and easy installation on your factory pre-wired
vehicle using our custom fit plug
in adapters or universal installation kit (for vehicles that are not pre-wired)
SEE BELOW
Activator III Brake Controller
#5520
ONLY
$79.95
Add To Basket
Activator 3 has the same features as
Activator II, plus "Plug-N-Play" capability on vehicles that are
pre-wired for electric brakes.
Requires universal installation kit
listed here or can use
custom fit Plug-N-Play Adapters
CLICK HERE
#
39522 Installation Kit $9.95
Add To Basket
-
For 1-4
axle trailers
-
Overload
indicator
-
Illuminated digital output indicator for exact power control.
-
Adjustable "Sync Control" allows for
control of "ramp up" timing
-
Front display allows viewing at almost
any angle
-
Up front
manual over-ride
-
Soft touch thumb wheel
-
Instructions and hardware included
Note: Not designed for use with electric/hydraulic trailer brake systems.
Can be used with BMW X5 Sport utility vehicles....call for information
Activator Digital
Remote
# R74951
On Sale...Limited Supply
Reg $119.95 Only
$99.95
Add To Basket
The
Draw tite Activator 3 Digital Remote
puts brake control at your fingertips! All control functions and displays are
located in the hand-held remote, while the main circuitry unit is mounted out of
sight under the vehicle's dash....very helpful with many of todays nearly
vertical dashboards. Activator Digital Remote Electric Brake Control
features improved ramp timing which smoothes the braking of smaller trailers,
yet packs the power to stop larger, multi-axled trailers. This brake control is
very popular with RVer's for it's adaptability to traffic situations and in city
towing. By using the remote control to activate the trailer brakes you can avoid
the rough braking associated with stop and go driving...making your towing
experience smoother and easier.
HELPFUL TIP!
The remote control attaches to
your vehicles dashboard without drilling!
Digital output
indicator
For
2,4,6 & 8 Brake Trailers
Overload Indicator
6' detachable coiled
cord
Push button SYNC CONTROL &
output adjustment
Mounts in any position,
under dash, no leveling required
Large over-ride trigger
for emergency braking
Convenient hand-held
design mounts anywhere and is detachable for storage
Quickly and easy installation on your factory pre-wired
vehicle using our custom fit plug
in adapters or universal installation kit (for vehicles that are not pre-wired)
SEE BELOW Note: Not designed for use with electric/hydraulic trailer brake systems.
Can be used with BMW X5 Sport utility vehicles....call for information
Brake Controller Wiring &
Accessories
BRAKE
CONTROL WIRING ADAPTERS (for use with
any of our brake controllers)

Accessories you need to
make your electric brake control installation easier!
Many of today's vehicles are pre-wired for
electric brakes. These electric trailer brake controller wiring adapters
plug into your vehicles under dash factory connectors to make installation
easy. You simply connect them to the wires from the brake controller of your
choice. The wires are color coded to match the brake controllers wiring. All
you do is splice them together and go.
If you do not see your vehicle listed
here scroll down for our universal wiring kit.
All Adapters Only $9.95
Each
Universal Adapters and Wiring Kits
click on photos for larger
illustrations
Universal Electric Brake Wiring Kit
# 5506 Wiring Kit $29.95
ADD TO BASKET
Electric Brake Controller Wiring Kit includes
Duplex Wire, Circuit Breaker, And Attaching Terminals....for use on vehicles
which are not pre-wired....see below for connectors.
7 Pin Converter Kit $29.95
Add To Basket
Converts 4 Flat Connector to 7
Pin. Includes hanger, hardware and all necessary connections for electric
brakes, 12 volt power supply and reverse lights. Has 4 flat connector
mounted in face of adapter for 2 weatherproof connectors in one.
Misc Connectors
#18020 7 Way Car End #18021 7 Way Trailer End
# 18036 6 Way Car End
$9.45
$7.65
$10.05
ADD
# 18020 TO BASKET
ADD # 18021 TO BASKET
ADD # 18036 TO BASKET
6 Way Trailer
End 7 Way To 4 Flat Adapter 6 Way To 4 Flat
Adapter
$7.80
$11.65
$11.65
ADD # 18037 TO BASKET
ADD # 18142 TO BASKET
ADD # 18143 TO BASKET
Universal Hangers Attach
Directly To Trailer Hitch
Kits Come With Screws
#18136 Bracket Kit
(1)
#18137 6 Way Hanger (2)
#18138 7 Way Hanger (2)
$6.90
$4.15
$4.15
ADD # 18136 TO BASKET
ADD # 18137 TO BASKET
ADD # 18138 TO BASKET
Need More information About The Proper
Wiring Type For Your Vehicle?
Call Us @ 866744-4282 or
E-Mail Us
ATA INTERNET SERVICES
  |